MINMAX模块电源MAU202_产品中心_珠海市明龙电子有限公司-军工网

1W, High Isolation SIP, Single & Dual Output DC/DC Converters

Key Features

‧ Efficiency up to 81%

‧ 3000VDC Isolation

‧ MTBF > 2,000,000 Hours

‧ Low Cost

‧ Input 5, 12 and 24VDC

‧ Output 3.3, 5, 9, 12, 15, ±5, ±9, ±12 and ±15VDC

‧ Temperature Performance -40°C to +85°C

‧ UL 94V-0 Package Material

‧ Internal SMD Construction

‧ Industry Standard Pinout

Selection Guide

Model Number	Input Voltage	Output Voltage	Output Current	Efficiency	Load Regulation
Model Number	VDC	VDC	mA	% Typ.	% Max.
MAU201	5 ( 4.5 – 5.5 )	3.3	260	73	10
MAU202		5	200	71	10
MAU203		9	110	76	8
MAU204		12	84	78	7
MAU205		15	67	78	7
MAU206		±5	±100	72	10
MAU207		±9	±56	77	8
MAU208		±12	±42	78	7
MAU209		±15	±34	79	7
MAU211	12 ( 10.8 – 13.2 )	3.3	260	74	8
MAU212		5	200	73	8
MAU213		9	110	78	5
MAU214		12	84	80	5
MAU215		15	67	80	5
MAU216		±5	±100	74	8
MAU217		±9	±56	79	5
MAU218		±12	±42	81	5
MAU219		±15	±34	81	5
MAU221	24 ( 21.6 – 26.4 )	3.3	260	73	8
MAU222		5	200	71	8
MAU223		9	110	76	5
MAU224		12	84	78	5
MAU225		15	67	79	5
MAU226		±5	±100	72	8
MAU227		±9	±56	76	5
MAU228		±12	±42	79	5
MAU229		±15	±34	80	5

Minmax's MAU200 1W DC/DC's
are specially designed to provide
high levels of isolation 3000VDC
in a miniature SIP package.

The series consists of 27 models
with input voltages of 5V, 12V and
24VDC which offers standard output
voltages of 3.3V, 5V, 9V, 12V, 15V,
±5V, ±9V, ±12V and ±15VDC for a
wide choice.

The MAU200 series is an excellent
selection for a variety of applications
including distributed power systems,
mixed analog/digital subsystems,
portable test equipments, local power
networks and battery backed systems.

Mechanical Dimensions

Pin Connections

Pin	Singles	Duals
1	+Vin	+Vin
2	-Vin	-Vin
5	-Vout	-Vout
6	No Pin	Common
7	+Vout	+Vout

Case Size –
5V & 12V Input – 19.5x6.1x10.2mm
	(0.77x0.24x0.40inch)
24V Input –19.5x7.1x10.2mm
	(0.77x0.28x0.40inch)
Case Material –
Non-Conductive Black Plastic
Weight –
5V & 12V Input – 2.2g (0.08Oz)
24V Input– 2.6g (0.09Oz)
Tolerance	Millimeters	Inches
	X.X±0.25	X.XX±0.01
	X.XX±0.13	X.XXX±0.005
Pin	±0.05	±0.002

Absolute Maximum Ratings
Parameter		Min.	Max	Units
Input Surge Voltage (1000mS)	5VDC Input Models	-0.7	9	VDC
	12VDC Input Models	-0.7	18	VDC
	24VDC Input Models	-0.7	30	VDC
Lead Temperature (1.5mm from case for 10sec.)		---	260	°C
Internal Power Dissipation		---	450	mW

Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings.

General Characteristics
Parameter	Conditions	Min.	Typ.	Max.	Units
Isolation Voltage	60 Seconds	3000	---	---	VDC
Isolation Resistance	500VDC	10	---	---	GΩ
Isolation Capacitance	100kHz, 1V	---	60	100	pF
Switching Frequency		70	100	120	kHz
MTBF	MIL-HDBK-217F @25°C Ground Benign	2	---	---	MHrs

Environmental Characteristics
Parameter	Conditions	Min.	Max.	Units
Operating Temperature	Ambient	-40	+85	°C
Operating Temperature	Case	-40	+90	°C
Storage Temperature		-40	+125	°C
Humidity		---	95	%
Cooling	Free-Air Convection

Output Characteristics
Parameter	Conditions	Min.	Typ.	Max	Units
Line Regulation	For Vin Change of 1%	---	±1.2	±1.5	%
Load Regulation	Io = 20% to 100%	See Selection Guide			%
Ripple & Noise	20MHz BW	---	65	100	mV P-P
Short Circuit	0.5 Second Max.

Maximum Capacitive Load
Models by Output Voltage (Each Output on Duals)	Singles	Duals	Units
Models by Output Voltage (Each Output on Duals)	220	100	uF

Derating Curve (3.3, 5 & ±5V Outputs)

Notes :

1.	Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted.
2.	These power converters require a minimum output load to maintain specified regulation.
3.	Operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed.
4.	All DC/DC converters should be externally fused at the front end for protection.
5.	Other input and output voltage may be available, please contact factory
6.	All specifications subject to change without notice.

Derating Curve (Other Outputs)